Renewable Energy Systems – Power Your Environment

Vertical Axis Wind Turbines

Vertical Axis Wind Turbines

VAWT units are great for urban areas and connect directly to our Power Package. We offer several types of machines, with several different designs. We have tested and used these or prototypes on our shop system and found they work well in the sometimes very high winds here in Ennis. call for discount pricing and operation information on any VAWT unit. We offer the C-type and Darieus-Savonius VAWT units which are a low cost way to utilize wind energy when using our Power Package system without large towers or expensive, over-rated wind generators. The WKV-600 and WKV-1000 wind generators can be used anywhere in any climate and are the ultimate in high end technology for wind power.

C-300W     300 Watts    $1,995.00
5″ blade Dia.     5 Blades     125lb     24-48vdc
Availability: 3-4 weeks
Details:  Vertical axis wind turbine rated 300 watts for any location-mounts on 3″ or 4″ sched-40 steel pipe at 10′ height minimum and rated for 300 watts output. The C-type wind generator employs planetary gear technology where every turn of the wind blades equals 3 turns of the generator rotor to produce high power at low rpm.
Comments:  Unit suitable for nearly any location-tower kit required for 4″ sched-40 steel pipe as tower. Analog or Digital controller available-see PDF for pricing.
Printable PDF: C-300W Product Information

C-500W     500 watts         $2,495.00
Dia-6 feet     7-Blades     150lbs     24vdc-48vdc
Availability:  3-4 weeks
Details:  Vertical Axis Wind Turbine (VAWT) with controller for mounting on 4″ sched-40 steel pipe at approx 7-10′ level about ground. The C-type wind generator employs planetary gear technology where every turn of the wind blades equals 3 turns of the generator rotor to produce high power at low rpm.
Comments:  Tower adaptor required for any pipe other than 4″ sched-40 steel. Add $295 for typical tower adaptor. No tilt tower required. Analog or Digital controller available-see PDF for pricing
Printable PDF: C-500W Product Information

C-1KW     1000 watts         $4,150.00
Dia -8.25 feet     5-Blades     187lbs     24vdc-48vdc
Availability:  3-4 weeks
Details:  Vertical Axis Wind Turbine (VAWT) unit with 1000 watts rated output and for mounting on 5″ sched-40 steel pipe-similar to C-500 unit. The C-type wind generator employs planetary gear technology where every turn of the wind blades equals 3 turns of the generator rotor to produce high power at low rpm.
Comments:  This unit requires a 5″ sched-40 steel tower of any height above 7″ from ground level. Complete tower kits are available for $ 855.00. Special Buck-Boost Digital controller available-see PDF for pricing.
Printable PDF: C-1KW Product Information

C-2KW     2000 watts         $4,950.00
Dia -8.25 feet     7-Blades     228lbs     48vdc/100vdc
Availability:  3-4 weeks
Details:  Vertical Axis Wind Turbine (VAWT) unit with 2000 watts rated output and for mounting on 6″ Sched-40 pipe, similar to c-500 unit. The C-type wind generator employs planetary gear technology where every turn of the wind blades equals 3 turns of the generator rotor to produce high power at low rpm. 
Comments:  This unit requires a 6″ sched-40 steel tower of any height above 10′ from ground level. Complete tower kits (20′) are available for $ 1,355.00. MPPT type controller only-see PDF for pricing.
Printable PDF: C-2KW Product Information

CIMG1887WKV-600 VAWT     600 watts     20 amps         $2,988.00 (Highly Recommended)
88lb.     24vdc
Blade Height:  4.2 feet
Availability:  4-weeks
Details:  Darrieus-Savonius type wind unit featuring Mag-lev technology for small spaces where infrastructure may be limited and low noise levels are very good. These units have been tested at our facility and are very reliable, with a 20 year life span with virtually no maintenance. Includes our TGW MPPT wind controller. This is an axial flux generator which can produce large amounts of power at low wind speed when adjusted properly. Simply the best wind generator available on the market for flexibility and reliability.
Comments:  These units can be shipped by air but at higher cost, when shipping by sea, 4 weeks is required. Requires 4″ sched-40 pipe for mounting and adaptor for $ 335.00. Typical complete tower setup $ 695.00
Printable PDF: WKV-600 Product Information

WKV-1000W VAWT     1000 watts     20 amps         $6,850.00  (Highly Recommended)
188lb     24v – 48vdc
Blade Height:  8 feet
Availability:  4 weeks
Details:  Darrieus-Savonius type wind unit featuring Mag-lev technology for small spaces where infrastructure may be limited and low noise levels are very good. These units have been tested at our facility and are very reliable, with a 20 year life span with virtually no maintenance. Includes our new TGW MPPT wind controller. This is an axial flux generator which can produce large amounts of power at low wind speed when adjusted properly. Simply the best wind generator available on the market for flexibility and reliability.
Comments:  This unit must be shipped by sea, when shipping by sea, 4 weeks is required. Requires 5″ sched-40 pipe for mounting and adaptor for $ 450.00.  Typical complete tower setup: $ 850.00 – $ 1650.00
Printable PDF: WKV-1000 Product Information

 

imagesd013XG-H1KW     1000         $2,994.00
60″ diameter     120lb     24/48v
Blade Diameter:  79″ Blade length
Availability:  2-3 weeks
Details:  Vertical axis wind turbine rated 1000watts, H-type design rated for high wind locations suitable for max winds speed of 112mph, highly efficient and quiet so also suitable for urban locations. Easy to assemble and operate, supplied with our TGW buck-boost controller.
Comments:  Units requires 5″ sched-40 steel pipe for mounting in high wind areas, 4″ Steep pipe in urban areas, may be up to 10′ height. Requires tower adaptor $ 395.00. Complete pipe and mounting system installed locally for $ 1650.00
Printable PDF: XG-H1KW Product Information